D-Link DIR-600 firmware update

# Setup your PC with static IP on 192.168.0.0 subnet.
# Open your web browser and get it ready to connect to 192.168.0.1.
# Press and HOLD the reset button on the router and connect power. Hold the reset button for about 3~5 seconds, then release.
# Connect the browser to http://192.168.0.1/ . The Emergency Room Updating Firmware screen should display.
# Browse to and upload the image file with the original formware.
# When you see the message "IMAGE UPLOAD SUCCESS", the flash will begin to be erased and re-written.

Linkuri ajutataoare :
Driver software Dlink
Driver software DD-wrt